Use Our Sandblasting Services In Murray, UT
Abrasive sandblasting services are used to resurface surfaces. These services remove oxidation, corrosion, and other undesirable materials from metal and other objects. The process is very effective, and the results are usually much better than the results of other methods.
There are two basic types of blasting services: dry sandblasting and wet sandblasting. Both methods use abrasive sands to remove graffiti and other materials. Both methods are effective and safe. A manual blast cabinet requires the operator to put on gloves, view the operation through a viewing window, and activate the blasting media. However, automated blast cabinets allow the operator to process large amounts of the same component without direct interaction. Automated blast cabinets have several blast nozzles that convey the components through the cabinet.
We Sandblast Buildings, Parking Lots & More
Wet abrasive blasting is a great way to remove a variety of contaminants and de-burr objects. It leaves objects clean and shiny and can be used to detect faults in sensitive equipment. Wet blasting is a great option for open environments where dust is a concern.
The process uses wet abrasives, which are usually nontoxic and easily disposed of. They also allow for precise finishes and production rates that rival those of sandblasting. Wet abrasive blasting is increasingly popular for environmental reasons. It can also be used to remove soluble salts.
Micro-abrasive blasting is a versatile process used in a number of industries, from medical implants to prehistoric fossils. This process eliminates minute manufacturing defects, improving product quality and increasing productivity in volume production. Micro-abrasive blasting is particularly useful in medical device manufacturing, where minute manufacturing defects can affect the performance and lifespan of the device.
Compared to conventional sandblasting, micro-abrasive blasting is much more precise and useful for parts with intricate designs. The media used is extremely fine, and the nozzle is tiny, which gives the technician a better degree of control. Micro-abrasive blasting is used for surface preparation, as well as for artistic purposes. Get started with a free quote from Full Blown Coatings.
Get in Touch with Full Blown Coatings
Address:
9479 South 500 West Sandy, Utah 84070
Abrasive Blasting
Sandblasting, also known as abrasive blasting, is really a generic term that refers to the process of smoothing, shaping, and cleaning a hard surface by forcing solid particles across that surface at high speeds.
Media Blasting
In general, media blasting is an alternative to sandblasting (read more about sand blasting here).
The process is essentially the same, but it uses materials other than sand for blasting.
Wet abrasive blasting
This type of sandblasting utilizes water to blast surfaces. The water traps the dust produced and lubricates the surface at the same time.
Experts find it a strong alternative to dry blasting.
Meta Micro abrasive blasting
This type of dry abrasive blasting process utilizes smaller nozzles (typically 0.25 mm to 1.5 mm diameter) to shoot a fine stream of particles on a small concentrated area on a larger area using high pressure.
Let the experts at Full Blown Coatings help you decide what the best blasting method is for your project.
We’ve tackled many jobs varying in size, material, and quantity. Our experience will ensure that you get the exact product you want, at the highest quality, in the time that you need it.Every job is highly significant to us, because every job gives us the chance to demonstrate the consistency and strength of our product.