Use Our Sandblasting Services In Cottonwood Heights, UT
Sandblasting is a process in which sand or other abrasive materials are directed at high-speed against a surface in order to clean it, roughen it, or remove paint or other coatings. Sandblasting is often used to prepare a metal surface for painting or other treatments. It can also be used to remove rust or prepare a surface for welding.
The sandblasting process is relatively simple. A sandblasting machine is connected to a source of compressed air and the operator wears a helmet or other protective clothing. The operator directs the flow of abrasive material at the surface to be cleaned. The abrasive material strips away the paint or other coating and leaves the surface clean and ready for painting or other treatment.
Let Us Sandblast Your Property In Cottonwood Heights, UT
Sandblasting is a quick and effective way to clean or prepare a surface. It is also relatively safe, as long as the operator takes proper safety precautions. The main hazards associated with sandblasting are inhalation of the abrasive material and exposure to the high-pressure air stream. At Full Blown Coatings, we have years of sandblasting experience. Rest assured your property will be well taken care of. We take care of every target area we receive.
Sandblasting services are an important part of the polishing process, since they remove any coatings or contaminants and leave the surface clean and clear. In addition, sandblasting removes imperfections and blemishes from metal surfaces, allowing for a more consistent finish in subsequent coats. It is a process that is effective for both large and small objects, and it can be used to resurface surfaces and prepare them for painting. Contact Full Blown Coatings for a free quote today!
Get in Touch with Full Blown Coatings
Sandblasting, also known as abrasive blasting, is really a generic term that refers to the process of smoothing, shaping, and cleaning a hard surface by forcing solid particles across that surface at high speeds.
In general, media blasting is an alternative to sandblasting (read more about sand blasting here).
The process is essentially the same, but it uses materials other than sand for blasting.
Wet abrasive blasting
This type of sandblasting utilizes water to blast surfaces. The water traps the dust produced and lubricates the surface at the same time.
Experts find it a strong alternative to dry blasting.
Meta Micro abrasive blasting
This type of dry abrasive blasting process utilizes smaller nozzles (typically 0.25 mm to 1.5 mm diameter) to shoot a fine stream of particles on a small concentrated area on a larger area using high pressure.
Let the experts at Full Blown Coatings help you decide what the best blasting method is for your project.
We’ve tackled many jobs varying in size, material, and quantity. Our experience will ensure that you get the exact product you want, at the highest quality, in the time that you need it.Every job is highly significant to us, because every job gives us the chance to demonstrate the consistency and strength of our product.