Use Our Sandblasting Services In Millcreek, UT
Sandblasting services are a process of propelling abrasive particles at high velocity against a surface in order to clean or prepare it for painting or other finishes. Sandblasting is often used to remove paint, rust, or other debris from metal, brick, or concrete surfaces. It can also be used to etch glass or stone.
The process of cleaning by sandblasting is one of the simplest and fastest ways to achieve a deep clean on a variety of surfaces. Although the method uses abrasives such as sand, other materials can also be used, including garnets, glass beads, walnut shells, and coal slag.
This technique is commonly used to clean industrial and manufacturing materials. It can be used to clean a variety of materials, including metal, cast iron, plastic, and composite materials. This process is especially effective for removing contaminants from surfaces because the abrasive particles have an angular shape, which creates a higher impact and therefore more force. However, it is important to remember that this method may damage materials that are not appropriate for blasting.
Let Us Sandblast Your Property In Millcreek, UT
Sandblasting is a cost-effective way to remove rust, paint, and other contaminants from metal surfaces. The process can also be used to prepare metal surfaces for future coatings, such as powder coating. The process can also remove casting marks. Once the process is complete, the surfaces are ready for the next step in the finishing process, such as painting.
Cleaning by sandblasting can be harmful to the operators, so it is essential to wear protective gear when performing this procedure. Operators are at risk for exposure to the cleaning solution, which can lead to choking and lung problems. Therefore, the procedure should be performed only by professionals. Contact Full Blown Coatings to get started!
Get in Touch with Full Blown Coatings
Address:
9479 South 500 West Sandy, Utah 84070
Abrasive Blasting
Sandblasting, also known as abrasive blasting, is really a generic term that refers to the process of smoothing, shaping, and cleaning a hard surface by forcing solid particles across that surface at high speeds.
Media Blasting
In general, media blasting is an alternative to sandblasting (read more about sand blasting here).
The process is essentially the same, but it uses materials other than sand for blasting.
Wet abrasive blasting
This type of sandblasting utilizes water to blast surfaces. The water traps the dust produced and lubricates the surface at the same time.
Experts find it a strong alternative to dry blasting.
Meta Micro abrasive blasting
This type of dry abrasive blasting process utilizes smaller nozzles (typically 0.25 mm to 1.5 mm diameter) to shoot a fine stream of particles on a small concentrated area on a larger area using high pressure.
Let the experts at Full Blown Coatings help you decide what the best blasting method is for your project.
We’ve tackled many jobs varying in size, material, and quantity. Our experience will ensure that you get the exact product you want, at the highest quality, in the time that you need it.Every job is highly significant to us, because every job gives us the chance to demonstrate the consistency and strength of our product.