Use Our Sandblasting Services In Midvale, UT
Sandblasting services can be used on a variety of surfaces to clean, smooth, or prepare them for painting or other treatments. Sandblasting is a process in which sand or other abrasive materials are shot at high speeds at a surface to remove contaminants or to prepare the surface for another treatment.
Sandblasting is often used to remove paint from surfaces such as metal, brick, or concrete. It can also be used to remove rust from metal surfaces. Sandblasting can also be used to clean the surface of a material before applying a new coating or paint. Sandblasting is a versatile tool that can be used for a variety of applications.
We'll Sandblast Your Property In Midvale, UT
Abrasive blasting is often used to prepare a surface for the application of paint or other finishes. The abrasive material is typically propelled by compressed air, water, or steam. Abrasive blasting can be used on both ferrous and non-ferrous metals, as well as on glass, stone, and certain types of plastic. The abrasive material and the surface being blasted must be compatible. For example, using a hard abrasive on a soft surface can result in damage to the surface.
Abrasive blasting is often used in conjunction with other surface preparation methods, such as chemical cleaning or mechanical polishing. The choice of abrasive material and blasting equipment depends on the surface being prepared, the type of finish required, and the production requirements.
Sandblasting is a dangerous process and should only be performed by trained professionals. The high-pressure air can cause serious injuries if it hits a person. If you are in need of a sandblasting service, our professionals at Full Blown Coatings are your sandblasters. They’ll sandblast all the dirt, grime, corrosion, and more contaminants away from your property. Contact us today!
Get in Touch with Full Blown Coatings
Sandblasting, also known as abrasive blasting, is really a generic term that refers to the process of smoothing, shaping, and cleaning a hard surface by forcing solid particles across that surface at high speeds.
In general, media blasting is an alternative to sandblasting (read more about sand blasting here).
The process is essentially the same, but it uses materials other than sand for blasting.
Wet abrasive blasting
This type of sandblasting utilizes water to blast surfaces. The water traps the dust produced and lubricates the surface at the same time.
Experts find it a strong alternative to dry blasting.
Meta Micro abrasive blasting
This type of dry abrasive blasting process utilizes smaller nozzles (typically 0.25 mm to 1.5 mm diameter) to shoot a fine stream of particles on a small concentrated area on a larger area using high pressure.
Let the experts at Full Blown Coatings help you decide what the best blasting method is for your project.
We’ve tackled many jobs varying in size, material, and quantity. Our experience will ensure that you get the exact product you want, at the highest quality, in the time that you need it.Every job is highly significant to us, because every job gives us the chance to demonstrate the consistency and strength of our product.