Salt Lake Sand Blasting
Sand Blasting Services for Full Blown Coatings
Sand Blasting: Here at Full Blown Coatings, we inspect, then sand blast or media blast every part we receive. You can find out more about media blasting here.
When preparing any surface for powder coating, it is extremely important that the item you are coating is completely clean of oils, dirt, paint, rust and corrosion. Sandblasting de-scales, de-buries and removes oxides, old finishing, and other surface contaminants from metals. We remove anything that might hinder the powder coating process.
Things such as grease, rust, and dirt contaminate the powder, interfere with the powder coating process, and weaken the bond between the powder and the metal. After cleaning your parts, sandblasting also etches/scratches the surface of the item, enabling better adhesion of the powder. As the powder coat flows into the high and low points of the surface profile, it adheres to the part much better than it could if the metal was a smooth surface.
Get In Touch With Full Blown Coatings
Contact us today to get a quote for your automotive powdercoating project.
PHONE
801.631.1708
EMAIL:
service@fullblowncoatings.com
ADDRESS:
9479 South 500 West Sandy, Utah 84070
ABRASIVE BLASTING
Sandblasting, also known as abrasive blasting, is really a generic term that refers to the process of smoothing, shaping, and cleaning a hard surface by forcing solid particles across that surface at high speeds...
WET ABRASIVE BLASTING
This type of sandblasting utilizes water to blast surfaces. The water traps the dust produced and lubricates the surface at the same time.
Experts find it a strong alternative to dry blasting...
Let the experts at Full Blown Coatings help you decide what the best blasting method is for your project.
We’ve tackled many jobs varying in size, material, and quantity. Our experience will ensure that you get the exact product you want, at the highest quality, in the time that you need it. Every job is highly significant to us, because every job gives us the chance to demonstrate the consistency and strength of our product.
